Відео

Thanks brother i really appreciate you taking the time to teach

Excellent video. Have you done video on Rear too? Or are they also discs not shoes

Thank you

we accidentally took the bracket off, what do we do?

Excellent video for the newer sprinters. Helpful hints as follows: 3:55 - that tab that he squeezes has another one on the bottom also. The other end just snaps into the lower air housing so may be easier to remove just like he did. 5:08 - Other videos show using large wire cutters to grab the clamp and pry it off and then pliers to snap them back on. It worked for me but maybe I'll have to replace them next time I replace the filter. 8:32 - notice that the little protrusion on the top of this plastic circlip faces away from the hose for re-installation. Also notice how snugly the hose connector fits onto the filter. Upon re-installation, make sure it snaps back into the same position before installing the circlip. 10:21 - this electrical connector was a bear to pry off. Had to use a pick to ensure the catch was released and took 2 large screwdrivers to get it to wedge free. Not Fun! 10:44 - I didn't remove the inlet turbo hose as I was able to access the E10 bolt under this hose using a swivel connector on my E10 socket. 12:24 - it takes 2 seconds to remove the circlip and hose to avoid breaking it. 14:07 - try to remove the 2 hoses first as they are very hard to slide off the filter and having the filter stationary helps. 14:45 - I really can't believe how easily you got those 2 hoses free. I used a pick to slide around the fitting to try and loosen the hose but it still took 2 screwdrivers prying on each side to get them off. (BTW - my 2021 had 23k miles on it and everything seemed like it was cemented in place. Major PITA removing the hoses and connectors from the filter! Hope these tips help.

Just finished the job. Thanks for the great video!

Do you need to use FIPG or the Toyota black rtv? I know on my 22re I had to do the halfmoons and they require Toyota fipg

How do remove the annoying key reminder chime?

Whoa! That was quick and easy E10 is that a 10mm My guess is that’s what you are saying. That’s an easy change. I’m Going to do this while changing the oil Oil and a coolant flush too. At the same time but not exactly at the same time. Concurrently. Question. Resetting the check engine light. That part I don’t know how to do. I will be doing all this at home. Any input is welcome. S500 2004 4-Matic is a smooth ride. Everyone that has borrowed the car loves it.

Good job 👍

Thx

very thorough explanation. Thanks for sharing bro!

Finished swapping out my starter on my 2020 Hyundai Elantra. Had to spend about $130 extra on tools, jacks and jack stands but all in all your instructions saved me sooooo much money. Thank You!

I can’t even open the first nut. Could you please tell me which size tool to loose the nut?

Get to the point!

Do you know the right hoses for it ? I can’t find it & it’s all I’m missing it’s hot as hell right now 😂

Thank you so much!!!!

You did well brother

i have a 1999 528i, question is, are both sensors the same? also are there only the 2 that you showed. thx

328i here 2013. So thx

Will this method work with the vtecs (D17A2) engines, can i do the disconnects from the valves like you have shown?

I appreciate you

Your video is awesome. Thank you very much.

What are your thoughts on auto zone or pep boys Vs Toyota tensioner. I know everyone, OEM is the best just thinking budget rn

We have a 2018 Fusion and the caliper bolts are driven with a 7mm hex socket. Are you certain yours are T-45? They're both hex, but if you use a Torx on a hex head you might end up rounded it out since there's less contact area.

Good video, but I hate to tell ya, I have done several of these, and all of them I pulled them from underneath, especially if it is 2wd.

How do you preload the lower control arms on the 2003 m45?

Do I need to remove the injection bar to take off the camshaft sensor i broke the old one trying to remove it the new camshaft sensor i can't get it in

Is it the same as 2002 c320 ?

Thanks man. You helped me out a lot with changing some coils on my fx35. It looked daunting until I seen your vid.

Dude, you streamlined this very well! Too many videos out there with fluff and extra unnecessary commentary!

What t45 …. What happened to regular bolts

Why does no one ever use the easiest tool for this job? That’s the pitman arm puller.

Muchas Gloracias por tu video. Me ha ayudado muchísimo como no tienes idea. debería de tener mucho mas Likes. Thanks a LOT for your video. This video has help me as you can't imagine. This video should have more likes.

5:50 Cada cuando tengo que cambiar las bujias de mi acura Ilx 2015 vivo en el desierto de mexicali baja california Mexico ??? Y necesito mas info para el motor de este auto ya que en internet como talleres de profesionales hay muy pocos!

Thanks! Good understandable video.

Which way you're turning it back in?

This is old But the thing comes out without all this bs

This is not even needed if your car runs fine.

So for bleeder screw how did u close up with everything back on??

Best video!

So I live in michigan and when I was taking the crank pulley off, the part where the pulley sits on the lower timing belt gear were rusted together and they both came off as one piece. I didn’t time it like you did in the video because I thought I was just taking the pulley off but now I can’t get the lower timing belt gear back on because of the tensioner. So I thought if I left it alone and didn’t rotate the bottom end at all, I could just time it correctly after I installed the new timing belt and water pump. I know it’s a unique situation, but I’m wondering if it’s ok to time it after the new belt is on if I don’t move anything. I am also having a very hard time getting the new belt and tensioner to go all the way around all the gears. I’m pretty sure the tensioner is as loose as it will go but it is still having a very hard time going onto the gears. I’m wondering if anyone else has had this happen to them and what I can do to fix it. Sorry about the long comment, just a lot of questions. Thanks anyone for any information!

Thank you

You can remove just the large plastic intake that runs from front fender to air filter housing. No need to remove everything, the first 15 min of work are unnecessary

Hello plz I need to reset the tire pressure monitor sensor to my car Volkswagen routan SE 2010? I don't know how , Can you help 🥺

Thank you! Don't have a Camry, but good/informative video!

Nice tip with the jack at the end, thanks.

Great video

Great video

10 million right can someone please tell me the name of the hose that he disconnected right before taking off the box not the big fat hoes but that's small thin one that kind of makes like an s